How to Connect Fire Alarm Signal to XP-GLS5000 Controller?

Problem (Issue) Statement:	How to connect Fire Alarm signal to XP-GLS5000 controller?
Description:	A guide to connect fire alarm signal for XP-GLS 5000 controller.
Related Software:	xPortalNet HS v1.8
Related Hardware:	XP-GLS5000
System Application:	Door Access System
Symptom and Finding:	NIL
Cause:	For first time connection for fire alarm signal to XP-GLS5000 controller.
Solution:	Summary: To connect fire alarm signal to XP-GLS5000 controller. Step-by-step Guide: To connect fire alarm signal to XP-GLS5000 controller: Step 1: Please refer to the wiring diagram: XP-GLS5000 controller to Fire Alarm signal connection. Figure 1: Fire Alarm Signal Connection to XP-GLS 5000 Controller Note For normal operations, fire alarm termination requires Normally Open (NO) dry contact on XP-GLS5000 controller to deactivate fire alarm mode. To trigger the fire alarm, the fire alarm panel needs to send a Normally Closed (NC) dry contact to XP-GLS5000 controller via the Fire Alarm terminals.
Date Documentation:	10/1/2018 (Rev 1.0)

PROOF-READ

.

Technical Knowledge Base