How to Connect Fire Alarm to XP-M1000i or XP-M1300i or XP-M2000i or XP-M2300i Controller

Owned by Tan Rong Wei (Unlicensed)
Last updated: Dec 30, 2020
1 min read

Problem (Issue) Statement:

How to connect fire alarm signal to XP-M1000i / XP-M1300i / XP-M2000i / XP-M2300i Controller

Description:

A guide to connect fire alarm signal for XP-M1000i / XP-M1300i / XP-M2000i / XP-M2300i Controller.

Related Software:

NA

Related Hardware:

  • XP-M1000i
  • XP-M1300i
  • XP-M2000i
  • XP-M2300i

System Application:

  • Door Access System

Symptom and Finding:

NA

Cause:

For first time connection for fire alarm signal to XP-M1000i / XP-M1300i / XP-M2000i / XP-M2300i controller.

Solution:

Warning!

We do not recommend controllers and PC communication to be connected via Wifi (using Wifi dongles) as Wifi connection is unstable and can make controller statuses be shown as "Down".

.

.

Summary

  • Please follow wiring diagrams as below:

Step 1: Wiring diagram: XP-M1000i/XP-M1300i controller to Fire Alarm signal connection:

Figure 1: Fire alarm signal connection for XP-M1000i / XP-M1300i controller


Step 2: Wiring diagram: XP-M2000i/XP-M2300i controller to Fire Alarm signal connection:

Figure 2: Fire alarm signal connection for XP-M2000i / XP-M2300i controller

Date Documentation:

4/5/2018 (Rev 1.0)

PROOF-READ

.

Related Articles.

Containing the label ("xp-m1000i" OR "xp-m2000i" ) AND "wiring-termination"

.

.

© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.