How to Configure XP-CPRO (Legacy Controller) at xPortalNet Software

This article will guide users on how to configure XP-CPRO (legacy controller) at xPortalNet software.

• xPortalNet

• XP-CPRO

• To reconfirm the wiring connection of XP-CPRO controller:

Step 1: Users are advised to check and reconfirm the wiring termination before configuring the settings in xPortalNet software.

.

.

• To check the Comm Port No connecting the MCI unit:

Step 1: Launch Device Manager. Right-click at Computer > Manage.

Figure 1: Right-click Computer and Select Manage

.

Step 2: The Computer Management window will be shown. Click Device Manager tab and expand Ports (COM & LPT) 

For MCI connected to Server PC via RS232 port:

Figure 2: Computer Management Showing the COM Port Connecting the MCI Unit Using Direct Port

.

For MCI connected to Server PC via USB-to-Serial converter:

Figure 3: Computer Management Showing the COM Port Connecting the MCI Unit Using USB-to-Serial Converter

.

.

• To configure the settings for XP-CPRO controller:

.

.

Step 1: Go to xPortalNet Server > Server Admin > Connection Setup > Add. The Add Connection window will be shown. Ensure that the Comm No field is selected as the same comm port connecting the MCI unit. Click OK to save the changes.

Figure 4: Add Connection Window

.

Step 2: Go to xPortalNet Server > Server Admin > System Device Setup > Controller > Add. The Add Controller window will be shown. Note of the settings explanation as follows. Click OK to save the changes.

Figure 5: Add Controller Window

.

.

.

Step 3: Go to xPortalNet Server > Server Admin > System Device Setup > Door > Add. The Add Door window will be shown. Note of the settings explanation as follows. Click OK to save the changes.

Figure 6: Add Door Window

.

.

.

Step 4: The newly added XP-CPRO controller will be shown in Device List. Ensure that the status of the controller is "Up".

Figure 7: Controller Status Shown as Up in Device List

.

Step 5: Click Door tab, ensure that the door status is also shown as "Up".

Figure 8: Door Status Shown as Up in Device List