How to Assign XP-GLS5000 Controller to Function as Alarm Monitoring Controller in xPortalNet HS Server Software

Problem (Issue) Statement:	How to assign XP-GLS5000 controller to function as Alarm Monitoring controller in xPortalNet HS Server software
Description:	A guide to assign XP-GLS5000 controller to function as Alarm Monitoring controller.
Related Software:	xPortalNet HS v1.8.0.7 and above
Related Hardware:	/wiki/spaces/FRN/pages/104497462 and above
System Application:	Alarm Monitoring System
Symptom and Finding:	NIL
Cause:	For first time configuration to assign XP-GLS5000 controller to function as Alarm Monitoring controller.
Solution:	Summary: To configure XP-GLS5000 controller to function as Alarm Monitoring. Step-by-step Guide: To configure XP-GLS5000 controller to function as Alarm Monitoring: Step 1: Turn "ON" DIP switch 3 for controller SETTING on XP-GLS5000 controller to enable Alarm Controller Mode. . Note Turn "ON" DIP switch 2 and 3 for controller *SETTING* on XP-GLS5000 controller for Door Access mode with Alarm Monitoring functions. . . Figure 1: DIP Switches for Controller SETTING on the XP-SNET Controller Step 2: The following table explains the functions of the DIP switches for controller SETTING on the XP-GLS5000 controller. Step 3: After configuring the DIP switches, press "RESET" on the XP-GLS5000 controller to reset the controller in order for the new settings to take effect. Note XP-GLS5000 controller can support readers such as RM800KLS, RM800KLP, RM80MS and RM80KLS.
Date Documentation:	10/4/2019

PROOF-READ

.

Technical Knowledge Base