How to Configure Door Zone Code for AntiPassback Application
Problem (Issue) Statement: | How to configure Door Zone Code for AntiPassback application |
Description: | The Door Zone Code must be configured in order to use the AntiPassback feature (applicable to both normal and Global AntiPassback). The Door Zone Code configuration allows the software to effectively track the position of the card user in order to apply the AntiPassback flag if the user attempt to access a zone code that he already is in. This article will guide users on how to configure Door Zone Code for AntiPassback application. |
Related Software: |
|
Related Hardware: |
|
System Application: | NIL |
Symptom and Finding: | NIL |
Cause: | For first time guide on how to configure Door Zone Code for AntiPassback application. |
Step 1: Refer to the following site condition: . Site Condition Explanation Site installed controller(s):
Door configuration:
. . . .
Step 1: Refer to the following site condition: . Site Condition Explanation Site installed controller(s):
Door configuration:
. . . . .
Step 1: Refer to the following site condition: . Site Condition Explanation Site installed controller(s):
Door configuration:
. . . . .
Step 1: Refer to the following site condition: . Site Condition Explanation Site installed controller(s):
Door configuration:
. . . | |
Common Issues: | NIL |
Porting Date: | 12/4/2019 |
PROOF-READ
.
.
.
© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.