How to Connect Fire Alarm Signal to XP-GLS300 Controller - Technical Knowledge Base

Templates

Technical Knowledge Base

All content
Space settings

Results will update as you type.

•
How to Connect XP-GT3500 Controller and Door Accessories with MAS-RBM Relay Board
•
How to Connect 2 Units XP-GT3500 Controller and Door Accessories with MAS-RBM for Single Door Access with Fingerprint Reader on Both Entry and Exit Directions
•
How to Connect Fire Alarm Signal for XP-GT3500 or XP-GTR1500 Controllers
•
How to Configure RS485 Address for XP-GT3500 or XP-GTR1500 Controller
•
How to Configure RS485 Address for XP-M1000i or XP-M1300i Controller
•
How to Connect XP-M1000i or XP-M1300i Controller to Door Accessories
•
How to Connect XP-M2000i or XP-M2300i Controller to Door Accessories
•
How to Connect XP-M1000i or XP-M1300i controller to Plato Reader
•
How to Connect XP-M2000i or XP-M2300i Controller to Plato Reader
•
How to Configure RS485 Address for XP-M2000i or XP-M2300i controller
•
How to Connect Multiple XP-M1000i or XP-M1300i Controllers to Server PC via RS485 Network
•
How to Connect Fire Alarm to XP-M1000i or XP-M1300i or XP-M2000i or XP-M2300i Controller
•
How to Connect Multiple XP-M2000i or XP-M2300i Controllers to Server PC via RS485 Network
•
How to Configure Connection, Controller, and Door Settings for XP-M1000i or XP-M1300i Controller with xPortal3000 Software
•
How to Configure Connection, Controller, and Door Settings for XP-M1000i or XP-M1000i-SE21 Controller with xPortalNet Software
•
How to Configure Connection, Controller, and Door Settings for XP-SNET controller with xPortalNet Software
•
How to Connect Third Party Readers Directly to TTL Port on XP-SNET Controller and Configure Door Settings in xPortalNet sofware
•
How to Connect Plato Readers Directly to XP-SNET Controller and Configure Door Settings in xPortalNet Software
•
How to Connect Third Party Readers to MK800E Reader Interface Module, and to Connect MK800E to XP-SNET Controller as well as to Configure Door Settings in xPortalNet Software
•
How to Connect Plato Readers to MK800E Reader Interface Module, and to connect MK800E to XP-SNET Controller as well as to Configure Door Settings in xPortalNet Software
•
How to Configure Connection, Controller, and Door Settings for XP-M2000i or XP-M2300i Controller with xPortalNet Software
•
How to Configure Connection, Controller, and Door Settings for XP-M2000i or XP-M2300i Controller with xPortal3000 Software
•
How to Configure Plato Reader's DIP Switch Address Settings
•
How to Assign XP-SNET Controller to Function as Lift Controller
•
How to Connect XP-SNET Controller to XP-SNET-E32R Extension Board for Lift Masking System Application
•
How to Configure Jumper Settings for XP-SNET-E32R Output Relays
•
How to Configure Input and Output Settings for XP-SNET-E248 Extension Board
•
How to Connect XP-SNET Controller with XP-SNET-E248 or XP-SNET-E32R Extension Board for Alarm Monitoring System Application
•
How to Configure Address Unit No on XP-SNET-E32R Extension Board
•
How to Configure Address Unit no on XP-SNET-E248 Extension Board
•
How to Setup Alarm Monitoring System Application Using XP-SNET Controller at xPortalNet Server
•
How to Configure Instruction Control for Alarm Monitoring System Application at xPortalNet Client
•
Why Certain Existing Card Users are Suddenly Unable to Access Doors and Software Transaction Log Shows "Unknown Card Number" Transaction
•
How to Copy the xPortalNet Database Data Files (MDF & LDF File Types)
•
How to Replace xPortalNet Database with Database Data Files (MDF and LDF File Types)
•
How to Gain Access to Program Data Folder in Server PC
•
How to Detach xPortalNet database from SQL Server
•
How to Attach xPortalNet Database to SQL Server
•
How to Configure Fire Alarm Auto Release for All Doors at xPortal3000
•
Why XP-SNET-E248 Extension Board Status is Not Shown as UP
•
How to Add Card User at the XP-GT3500 or XP-GTR1500 Controller
•
How to Add Card User in xPortalNet Software
•
How to Add Card User in xPortal3000 Software
•
How to Configure Door Access Level at xPortalNet Software
•
How to Configure Door Access Level at xPortal3000 software
•
How to Configure Time Zone Settings in xPortalNet Software
•
How to Configure Time Zone Settings in xPortal3000 Software
•
How to Configure Time Set Settings in xPortalNet Software
•
How to Configure Time Set settings in xPortal3000 Software
•
How to Add or Enrol Fingerprint Template at the XP-GT Controller
•
Why does the Connected Suprema BioMini Fingerprint Reader Not Able to Capture Fingerprint
•
How to Enrol Fingerprint Template at xPortalNet or xPortal3000 Software
•
How to Download or Retrieve Fingerprint Template Enrolled in XP-GT Controller to xPortalNet or xPortal3000 Software Database
•
How to Install Fingerprint Template from One XP-GT Controller to Another XP-GT Controller
•
How to Enable Visitor Auto Sign Out Feature at xPortalNet
•
How to Setup Visitor Management System on xPortalNet Software
•
How to Generate Daily Attendance Report in xPortalNet Software
•
How to Generate Daily Attendance Report in xPortal3000 Software
•
How to Set Up Work or Time Attendance Schedule and Assign it to Staffs in xPortalNet Software
•
How to Set Up Work or Time Attendance Schedule and Assign it to Staffs in xPortal3000 Software
•
How to Set Up a New Work Schedule in Shift Setting in xPortal3000 Software
•
How to Generate Monthly Attendance Report in xPortal3000 Software
•
How to Generate Monthly Attendance Report in xPortalNet Software
•
How to Manually Install Device Driver for OMNIKEY 5421 or 5422 Card Reader
•
How to Setup Mifare Sector Programming Key and Read & Write Mifare Card ID Number in xPortal3000 Software
•
How to Setup Mifare Sector Programming Key and Read & Write Mifare Card ID Number in xPortalNet
•
How to Connect Fire Alarm Signal to XP-GT3200 Controllers
•
How to Setup DESFire Credential Profile Configuration at xPortalNet HS
•
How to Write or Program Card ID Number into DESFire Card
•
How to Add DESFire Card User in xPortalNet HS Software
•
How to Configure Lift Access in xPortalNet HS Software
•
How to Configure Floor Zone and Floor Accessibility in xPortalNet HS v1.8 Software
•
How to Configure Software to Perform READ Only Operation for Mifare Card Sector in xPortal3000 Software
•
How to Configure the Email Notification in xPortalNet Software
•
How to Solve Error Message of "Email could not be sent" When Sending Test Email for Email Notification in xPortalNet Software
•
How to Configure AntiPassback Settings for Single Door Controller in xPortal3000 Software
•
How to Configure AntiPassback settings for Single Door Controller in xPortalNet Software
•
Why did the xPortalNet Services Failed to Detect the Plugged In Dongle License
•
How to Configure Global AntiPassback Controller (GAC) Settings in xPortalNet Server
•
How to Enable Client GAC Controller Setup in xPortalNet Client
•
How to Connect Fire Alarm Signal to XP-GLS300 Controller
•
How to Connect XP-GLS300 Controller to Door Accessories
•
How to Connect XP-GLS300 Controller to Plato Reader
•
How to Connect XP-GLS300 Controller to XP-SNET-E32R Extension Board for Lift Masking Application
•
How to Remotely Update USB Dongle License
•
How to Install xPortal3000 Software for a Fresh Installation
•
Why Users are Unable to Launch xPortalNet Client Software after Completing Installation to New Client PC
•
How to Manually Install Microsoft .NET Framework 1.1 on Windows 10, Windows 8, Windows 7, Windows Vista and Windows Server 2008
•
Error Message of "SQL Server Does Not Exist or Access Denied" is Shown When Users Attempt to Launch xPortalNet Server (Solution 1)
•
How to Export xPortalNet software's staff records via SQL XPNDB folder
•
How to Launch the Command Prompt in Windows Operating System
•
How to Migrate xPortal2005 Database to xPortal3000 Software
•
How to Connect XP-M4L Controller to XP-SNET-E32R Extension Board for Lift Masking System Application
•
How to Connect XP-M4L Controller to Card Readers
•
How to Configure Event Filters in xPortalNet
•
How to Setup XP-M4L Controller in xPortalNet Software
•
How to Backup xPortal3000 Database
•
How to Restore xPortal3000 Database
•
When Users Flashed Card on RDMFX or RDMFXE Reader, the Reader Responded with a Beep Sound But Software is Unable to Receive any Transactions from Controller
•
After Repairing the MCI, xPortalNet v1.0 Software is Still Unable to Detect the Plugged In License