How to Configure Default Door Access or Floor Access Assignment in xPortalNet Software

Problem (Issue) Statement:

How to Configure Default Door Access or Floor Access Assignment in xPortalNet Software

Description:

The Default Door Access / Floor Access Assignment is used to auto populate the Door Access No. / Floor Access No. value during staff record / visitor sign in assignment. The available options are Disabled, By Tenant or By System User. 

• User must configure the Door Access No. / Floor Access No. from Tenant Setup if opted to use By Tenant.
• Whereas if opted By System User, they need to configure the Door Access No. / Floor Access No. from the System User setup. 

Related Software:

xPortalNet v1.5.0.128 or higher

Related Hardware:

NIL

System Application:

Door Access System

Symptom and Finding:

Cause:

Solution:

.

.

Summary 

• To Configure the Default Door Access / Floor Access Assignment.

Step 3: The System User Setup window will be shown.

^{Figure 1: Add System User Window.}

Step 4: Modify the existing System User or add new one.

Step 5: At the Default Door Access / Floor Access Assignment field, please configure it according to the description below:

^{Figure 2: Default Door Access/ Floor Access Assignment Field.}

^{Table 1: Default Door Access/ Floor Access Assignment Field Description.}

Step 6: If user opted to choose By Tenant, user must configure the Default Door Access No. / Floor Access No. from the Tenant setting at the Client software.

^{Figure 3: Tenant Setup Window.}

.

.

Step 7: If user opted to choose By System User, please specify the Default Door Access No. / Floor Access No.

^{Figure 4: By System User Field.}

Step 8: Click OK to confirm and save changes.

Document Date

02/08/2018 (Rev 1.0)