/
How to Connect XP-M4L Controller to Card Readers

How to Connect XP-M4L Controller to Card Readers

Problem (Issue) Statement:

How to connect XP-M4L controller to card readers

Description:

A guide to connect XP-M4L controller with card readers.

XP-M4L controller is able to support three (3) different ways to connect to card readers:
1. Connect to Plato readers directly
2. Connect to readers via XP-MK800E
3. Connect to third party readers directly

Related Software:

  • xPortalNet v1.5.0.125

Related Hardware:

  • XP-M4L v4.01
  • XP-E32R v2.03

System Application:

  • Lift Masking Access System

Symptom and Finding:

NA

Cause:

For first time connection between XP-M4L controller with reader.

Solution:

Summary


Step-by-step Guide:

  • To connect XP-M4L controller to Plato readers directly:

Step 1: Please follow the wiring diagram as shown below:
Wiring Diagram to Connect XP-M4L Controller to Plato Readers Directly
Figure 1: Wiring Diagram to Connect XP-M4L Controller to Plato Readers Directly


Step 2: The table below indicates the Plato reader address settings and the corresponding lift panel number.



User may refer to How to Configure Plato Reader's DIP Switch Address Settings for the complete procedures on configuring the address settings on Plato Reader.



  • To connect XP-M4L controller to readers via XP-MK800E:

Step 1: Please follow the wiring diagram as shown below:
Wiring Diagram to Connect XP-M4L Controller to XP-MK800E
Figure 2: Wiring Diagram to connect XP-M4L Controller to XP-MK800E


Step 2: The table below indicates the XP-MK800E address settings and the corresponding lift panel number.



  • To connect XP-M4L controller to third party readers directly:

Step 1: Please follow the wiring diagram as shown below:

Figure 3: Wiring Diagram to connect XP-M4L Controller to Third Party Readers Directly


Warning!

MicroEngine controllers only support open-collector type Wiegand 3rd party readers. 

Date Documentation:

17/7/2018 (Rev 1.0)

PROOF-READ

.

.


.

Related content

How to Setup XP-M4L Controller in xPortalNet Software
How to Setup XP-M4L Controller in xPortalNet Software
Read with this
How to Use Card Plus PIN Mode for XP-M1000i Controller
How to Use Card Plus PIN Mode for XP-M1000i Controller
More like this
How to Configure Lift Access Control at xPortalNet Server
How to Configure Lift Access Control at xPortalNet Server
Read with this
How to Connect XP-GLS300 Controller to Plato Reader
How to Connect XP-GLS300 Controller to Plato Reader
More like this
Flashed Valid Card to Lift Reader but Unable to Select Floor Buttons
Flashed Valid Card to Lift Reader but Unable to Select Floor Buttons
Read with this
How to Connect XP-M1000i or XP-M1300i controller to Plato Reader
How to Connect XP-M1000i or XP-M1300i controller to Plato Reader
More like this

© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.