How to Connect Third Party Readers to MK800E Reader Interface Module, and to Connect MK800E to XP-SNET Controller as well as to Configure Door Settings in xPortalNet Software

Problem (Issue) Statement:	How to connect third party readers to MK800E Reader Interface Module, and to connect MK800E to XP-SNET controller as well as to configure door settings in xPortalNet software
Description:	A guide to connect third party readers to MK800E Reader Interface Module, and to connect MK800E to XP-SNET controller as well as to configure door settings in xPortalNet software.
Related Software:	xPortalNet Lite xPortalNet Standard xPortalNet PS
Related Hardware:	XP-SNET XP-MK800E Third Party Reader
System Application:	Door Access System
Symptom and Finding:	NA
Cause:	For first time connection between third party readers to MK800E Reader Interface Module, and to connect MK800E to XP-SNET controller as well as to configure door settings in xPortalNet software.
Solution:	Warning! Users are not recommended to run any xPortal software in Windows XP operating system as the system is unstable Users are also advised to stop the xPortal Services before shutting down the Server PC to prevent any missing transaction issues. . . Summary To connect third party reader to MK800E Reader Interface Module. To connect MK800E to terminal block of CON33 on XP-SNET controller. To configure Door Setting on xPortalNet. Step-by-step Guide: To connect third party reader to MK800E Reader Interface Module: Step 1: Please follow the wiring diagram as below: Figure 1: Wiring diagram for third party readers to MK800E . . To connect MK800E to terminal block of CON33 on XP-SNET controller: Step 1: Please follow the wiring diagram as below: Figure 2: Wiring diagram for MK800E to XP-SNET controller . . To configure Door Setting on xPortalNet: Step 1: Ensure that the Connection and Controller setup has been completed. Knowledge Base Link Users may refer to How to Configure Connection, Controller, and Door Settings for XP-SNET controller with xPortalNet Software to complete the configuration settings. Step 2: For Door Setup, go to Server Admin > System Device Setup > Door > Add. The Door Setup window shown as below: Figure 3: Add Door window . Step 3: The table below shows the setting example for each door:
Date Documentation:	22/6/2018 (Rev 1.1)

Proof-read

.

How to Connect Third Party Readers to MK800E Reader Interface Module, and to Connect MK800E to XP-SNET Controller as well as to Configure Door Settings in xPortalNet Software

Step-by-step Guide:

Related Articles.