How to Configure Guard Tour Reader in xPortalNet Software
Problem (Issue) Statement: | How to Configure Guard Tour Reader in xPortalNet Software |
Description: | A guide to configure the Guard Tour Reader. This feature is applicable when user want to apply guard tour checking. The assigned guard will have to flash their card to the configured Guard Tour Reader upon the checking. Only accessible guard can access the door. Otherwise, they can only perform the guard tour checking. |
Related Software: | xPortalNet v1.5.0.104 or higher |
Related Hardware: | XP-M2000i v6.10 and above, XP-M1000i v2 v6.00 and above |
System Application: | Door Access System |
Symptom and Finding: | NIL |
Cause: | For first time guide to configure the Guard Tour Reader in xPortalNet software. |
Solution: | Warning!
. . Summary
Step-by-step Guide:
In these steps, user will be guided to configure which reader (Door) to become the Guard Tour Reader. Pre-Configuration Please configure the correct controller model supporting the Guard Tour checking feature. Step 1: Login to xPortalNet Client. Step 2: Go to Guard Tour > Guard Tour Reader. Step 3: The following window will be shown. Step 4: Click Add to add new guard tour reader. Step 5: Fill in the fields according to the description below: Step 6: Click OK to confirm and save settings. Next step: To Configure the Guard Tour Check Point |
Document Date | 18/07/2018 (Rev 1.0) |
PROOF-READ
.
.
.
© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.