How to Connect Plato Readers Directly to XP-SNET Controller and Configure Door Settings in xPortalNet Software

Owned by Tan Rong Wei (Unlicensed)
Last updated: Dec 30, 2020
1 min read

Problem (Issue) Statement:

How to connect Plato readers directly to XP-SNET controller and configure door settings in xPortalNet software

Description:

A guide to connect Plato readers directly to XP-SNET controller and configure door settings in xPortalNet software.

Related Software:

  • xPortalNet Lite
  • xPortalNet Standard
  • xPortalNet PS

Related Hardware:

  • XP-SNET

System Application:

  • Door Access System

Symptom and Finding:

NA

Cause:

For first time connection between Plato readers direct to XP-SNET controller and configure door settings in xPortalNet software.

Solution:







Warning!

  • Users are not recommended to run any xPortal software in Windows XP operating system as the system is unstable

  • Users are also advised to stop the xPortal Services before shutting down the Server PC to prevent any missing transaction issues.

.

.

Summary

  • To connect Plato reader to terminal block of CON32 on XP-SNET controller.

  • To configure Door Settings on xPortalNet.


Step-by-step Guide:

  • To connect Plato reader to terminal block of CON32 on XP-SNET controller:

Step 1: Please follow the wiring diagram as below:
 
Figure 1: Wiring diagram for Plato reader connection


  • To configure Door Settings on xPortalNet:

Step 1: Ensure that the Connection and Controller setup has been completed.

Note

Users may refer to How to Configure Connection, Controller, and Door Settings for XP-SNET controller with xPortalNet Software to complete the configuration settings.



Step 2: For Door Setup, go to Server Admin > System Device Setup > Door > Add. The Add Door window will be shown as below:
Add Door Window
Figure 2: Add Door window




Step 3: The table below shows the setting example for each door:

Date Documentation:

16/5/2018 (Rev 1.0)

PROOF-READ

.

Related Articles.

Containing the label "snet" AND "setup-guide"

.

.

© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.