/
How to Assign XP-GLS5000 Controller to Function as Lift Controller

How to Assign XP-GLS5000 Controller to Function as Lift Controller

Owned by Tan Rong Wei (Unlicensed)
Last updated: Nov 10, 2021 by Wan Lin Lee

Problem (Issue) Statement:

How to assign XP-GLS5000 controller to Function as Lift Controller?

Description:

A guide to assign XP-GLS5000 controller to function as Lift Controller

Related Software:

  • xPortalNet HS v1.8.0.7 and above

Related Hardware:

  • XP-GLS5000 v1.16 and above

System Application:

  • Lift Masking System application

Symptom and Finding:

NA

Cause:

For first time configuration to assign XP-GLS5000 controller to function as Lift Controller.

Solution:







Summary:

  • To configure the XP-GLS5000 controller to function as Lift Controller.


Step-by-step Guide:

  • To configure the XP-GLS5000 controller to function as Lift Controller:

Step1: Turn "ON" DIP switch 1 for controller SETTING on XP-GLS5000 controller.
DIP Switches for Controller SETTING on the XP-SNET Controller
Figure 1: DIP Switches for Controller SETTING on the XP-GLS5000 Controller


Step 2: The following table explains the functions of the DIP switches for controller SETTING on the XP-GLS5000 controller.



Step 3: After configuring the DIP switches, press "RESET" on the XP-GLS5000 controller to reset the controller in order for the new settings to take effect.


Note

XP-GLS5000 controller can support readers such as RM800KLS, RM800KLP, RM80MS and RM80KLS.

Common Issues:Nil

Date Documentation:

15/1/2019

PROOF-READ

.

Related Articles.

Containing the label "xp-gls5000" AND "lift-access-mode"

.

.

Related content

© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.