Why the Standalone Reader Keeps on Producing Beeping Sound when Door is Closed

Owned by Tan Rong Wei (Unlicensed)
Last updated: Dec 31, 2020
1 min read
Problem (Issue) Statement:Why the standalone reader keeps on producing beeping sound when door is closed
Description:Standalone reader keeps beeping.
Related Software:NIL
Related Hardware:
  • XP-SR40
  • XP-SK32
  • XP-SR200K
  • XP-SR200KN    
System Application:
  • Standalone controllers
Symptom and Finding:When the door is closed, the reader keeps producing beep sounds
Cause:Upon further investigation, it was discovered that the magnetic Door Sensor is not properly connected to the DS and 0V terminal
Solution:

Summary:

  • Ensure that the wiring connection is correct.

  • Further troubleshooting steps to determine functionality of controller.

Step-by-step Guide:

  • Ensure that the wiring connection is correct:

Step 1: Please make sure that the wiring connection is correct.


Step 2: Check and ensure that the wiring termination is connected properly and that the wires are not loose or improperly terminated.



  • Further troubleshooting steps to determine functionality of controller:

Step 1: If problem persists even though wiring is connected correctly and properly, use a short jumper wire to connect directly from terminal DS to 0V.


Step 2: If the problem persists after connecting the jumper wire from terminal DS to 0V, the reader is faulty. Please send the reader back to your supplier to request for repair works.

Porting Date:26/11/2018 (Rev 1.0)

PROOF-READ

.

Related Articles.

Containing the label "standalone-reader"

.

.

© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.