How to Configure the Display Option in Event Filters

Step 1: Fill up the following field as shown below:

• Display Option: Display
• Log to Database: Yes
• Activation TimeZone: Always

^{Figure 3: Add Event Filters WIndow.}

Step 2: Add the Event Filters Configuration.  Click Add button.

• Event Category: Alarm Definition Library 
  1. Alarm Definition Library: Select Alarm Definition
• Device Type: Controller
• Device Code: Select Device Code
• Time Schedule: Always

^{Figure 4: Event Filters Configuration Window.}

Step 3: The Filter List is only enabled for Filtered Option. Click OK to confirm and save the changes.

^{Figure 5: Filter List Window.}

Step 4: Observe the Latest Event List from the Server software when the configured event is triggered.

^{Figure 6: Server Transaction List.} 

Step 5: Observe the Latest Event List from the Client software when the configured event is triggered.

^{Figure 7: Client Transaction List.}

Step 6: Check the transaction report. Login to xPortalNet Client. Go to Reports > Event Report > Transaction Reporting. 

^{Figure 8: Transaction Reporting.}

Step 7: You have successfully configured the Display Option configuration. 

Explanation: The configured event transaction "(NK) Controller Tamper On" is displayed in the Latest Event List from the Server and Client software when the event is occurred. This is according to the configured Event Filters.