How to Set Door Open Time in xPortalNet Software

Owned by Tan Rong Wei (Unlicensed)
Last updated: Mar 30, 2020
1 min read

Problem (Issue) Statement:

How to set Door Open Time in xPortalNet software

Description:

This article will guide users to set Door Open Time in xPortalNet software.

Related Software:

  • xPortalNet

Related Hardware:

NIL

System Application:

NIL

Symptom and Finding:

NIL

Cause:

For first time guide to set Door Open Time in xPortalNet software.

Solution:







Warning!

  • Users are not recommended to run any xPortal software in Windows XP operating system as the system is unstable

  • Users are also advised to stop the xPortal Services before shutting down the Server PC to prevent any missing transaction issues.

.

.

Summary:

  • To set Door Open Time in xPortalNet software.


Step-by-step Guide:

  • To set Door Open Time in xPortalNet software:

Step 1: Go to xPortalNet Client > Data Setup > System Setting > Door > select the door to be modified > Modify. The Edit Door window will be shown. Configure the Door Open Time field as required. Click OK to save the changes.
Door Open Time in Edit Door Window
Figure 1: Door Open Time Field in Edit Door Window

.

Note

The Door Open Time setting is the duration where the door will remain open after an access is granted. After the Door Open Time duration has pass, the buzzer will then beep to indicate that the door has been left open.

Default value: 10 sec ; Min value: 0 sec ; Max value: 99 sec

If the Door Open Time is configured as "0", the door can be left open and the buzzer will not beep.

Common Issue

NIL

Date Documentation:

13/3/2020 (Rev 1.0)

PROOF-READ

.

Related Articles.

Containing the label "door-open-time"

Filter by label

There are no items with the selected labels at this time.

.

.

© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.