How to Configure the AntiPassBack Function in Controller Programming Menu for Legacy XP-GT or XP-GTR Controller
Problem (Issue) Statement: | How to configure the AntiPassBack function in controller Programming Menu for legacy XP-GT or XP-GTR controller |
Description: | This article will guide users to configure the AntiPassBack function in controller Programming Menu for legacy XP-GT or XP-GTR controller. |
Related Software: | NIL |
Related Hardware: |
|
System Application: | NIL |
Symptom and Finding: | NIL |
Cause: | For first time guide on how to configure the AntiPassBack function in controller Programming Menu for legacy XP-GT or XP-GTR controller. |
Summary:
. . Step-by-step Guide:
Step 1: Enter the Programming Menu of the controller. Knowledge Base Link Users may refer to How to Enter into Programming Menu for Legacy XP-GT or XP-GTR Controllers for the complete steps on how to enter Programming Menu for the legacy XP-GT or XP-GTR controllers. . . Step 2: Press 1 for System Menu > 2 for Door Parameter. The screen below will be shown. . Step 3: Use the and to navigate the menu to the AntiPassBack screen. Press the key to enter into the parameter, and press the and key to change the value to ON and press key again to save the changes. Press the key to return to the System Menu. . Step 4: The Save Changes screen will then be shown. Press the key to confirm saving the changes. . Note If the configuration is interrupted midway, the configuration changes will not be saved! . . Step 5: After saving the changes, at the screen of the idle mode, the AntiPassBack icon will be shown. . Knowledge Base Link Users may refer to How to Clear AntiPassBack for the Legacy XP-GT or XP-GTR Series Controllers for the complete steps on how to reset the AntiPassBack flag for all the users in the controller. | |
Common Issues: | NIL |
Porting Date: | 30/10/2019 |
PROOF-READ
.
.
.
© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.