How to Set Output Time Zone for XP-SNET Controller in xPortalNet Software

How to set Output Time Zone for XP-SNET controller in xPortalNet software

This article will guide users to set Output Time Zone for XP-SNET controller in xPortalNet software.

• xPortalNet

Summary:

.

• To set Output Time Zone for XP-SNET controller in xPortalNet software:

Step 1: At the XP-SNET controller, set the DIP switch 2 and 3 of the SETTING DIP switch to the ON position.

Figure 1: SETTING DIP Switch on XP-SNET Controller

.

Step 2: Reset the controller after the DIP switches are adjusted.

Figure 2: RESET Button on XP-SNET Controller

.

Step 3: Go to xPortalNet Server > Server Admin > System Device Setup > Alarm Controller > Add. The Add Alarm Controller window will be shown. Set the Unit No. as "10", and select the Model No as "Built-In IO".

Figure 3: Add Alarm Controller Window

.

Step 4: Next, go to xPortalNet Server > Server Admin > System Device Setup > Output Point > Add. The Add Output window will then be shown.
 
Figure 4: Add Output Window 

.

.

.

Step 5: Go to xPortalNet Client > Data Setup > System Setting > Output > select the correct Output > Modify. The Edit Output window will then be shown. Under the Output TZ field, select the pre-configured Time Zone.

Figure 5: Edit Output Window

.