How to Configure Extra Input and Output to Trigger Barrier Gate via Loop Detector in xPortalNet Software

Summary:

• To Setup Alarm Controller.

• To setup Input Point.

• To setup Output Point.

• Send door Setting to controller.

• To verify input/output transaction at the Latest Event Transaction.

..

Step-by-step Guide:

• To Setup Alarm Controller:

Step 1: After adding Connection, Controller and Door, users must add an alarm controller.

.

Step 2: Go to xPortalNet Server> Server Admin > System Device Setup > Alarm Controller.

.

Step 3: The Alarm Controller Setup window will be shown. Click Add.
 
Figure 1: Alarm Controller Setup Window

.

Step 4: The Add Alarm Controller window will be shown. Fill the details and take note on the highlighted fields. Click OK to save the changes.
 
Figure 2: Add Alarm Controller Window

.

.

.

• To setup Input Point:

Step 1: Go to xPortalNet Server > Server Admin > System Device Setup > Input Point.

.

Step 2: The Input Setup window will be shown. Click Add.
 
Figure 3: Input Setup Window

.

Step 3: The Add Input window will be shown. Fill in the details according to the table below. Click OK to continue after filling in the details.
 
Figure 4: Add Input Window

.

.

Step 4: The Record Added! window will be shown. Click OK to continue.
 
Figure 5; Record Added Window

.

Step 5: User will return to the Input Setup page. Click Close to exit.
 
Figure 6: Click Close to Exit from the Input Setup Window

.

Step 6: The Request submitted to reload Input list! window will be shown. Click OK to continue.
 
Figure 7: Request Submitted to Reload Input List Window

.

.

• To setup Output Point:

Step 1: Go to xPortalNet Server > Server Admin > System Device Setup > Output Point.

.

Step 2: The Output Setup window will be shown. Click Add.
 
Figure 8: Output Setup Window

.

Step 3: The Add Output window will be shown. Fill the details according to the table below.

Figure 9: Add Output Window

.

.

Step 4: Next, fill in the details on Event Trigger On section accordingly. Click OK to continue.
 
Figure 10: Event Trigger On Section in Add Output Window

.

.

Step 5: The Record Added! window will be shown. Click OK to continue.
 
Figure 11: Record Added Window

.

Step 6: User will return to the Output Setup page. Click Close to continue.
 
Figure 12: Clicking Close to Exit from Output Setup Window

.

Step 7: The Request submitted to reload Input list! window will be shown Click OK to continue.
 
Figure 13: Request Submitted to Reload Input List Window

.

.

• Send door Setting to controller:

Step 1: Go to xPortalNet Client > Device Comm > Send Door Setting. The Send Door Controller Settings window will be shown.
 
Figure 13: Send Door Controller Settings Window

.

Step 2: Select the respective controller and click Send All Setting.
 
Figure 14: Selecting the Respective Controller and Click Send All Setting

.

Step 3: The following Send Data and Command window will be show as below, please wait a while.
 
Figure 15: Send Data and Command Window

.

Step 4: Next, the Delivery Report will be shown once the send data to controller process is completed. Ensure that all of the sending data is completed without any errors, as it may affect the controller operation.
 
Figure 16: Delivery Report Window

.

.

• To verify input/output transaction at the Latest Event Transaction:

Step 1: User may go to xPortalNet Client to monitor transaction from controller at Latest Event Transaction page shown as below.
 
Figure 17: Latest Event List Window

.

Step 2: The xPortalNet software will record the following transactions when the input point configured for the barrier gate is activated. The various transactions are explained in the table that follows.
 
Figure 18: Transactions Recorded in Latest Event List Window

.