How to Connect MPS-330 Switching Power Supply to MicroEngine Controllers

Owned by Tan Rong Wei (Unlicensed)
Last updated: Feb 06, 2020
1 min read

Problem (Issue) Statement:

How to connect MPS-330 switching power supply to MicroEngine controllers

Description:

A guide to connect MPS-330 switching power supply to MicroEngine controllers.

Related Software:

NIL

Related Hardware:

  • All MicroEngine controllers

System Application:

NIL

Symptom and Finding:

NIL

Cause:

For first time guide to connect MPS-330 switching power supply to MicroEngine controllers.

Solution:







Summary:

  • To connect MPS-330 switching power supply to MicroEngine controllers.

.

Warning!

The maximum load that the MPS-330 switching power supply can deliver is 2.8A. Ensure that the connected loads (controller and EM lock) do not exceed this Ampere rating!

.

.

Step-by-step Guide:

  • To connect MPS-330 switching power supply to MicroEngine controllers:

Step 1: Please follow the wiring diagram as shown below:
Wiring Diagram for MPS-330 Switching Power Supply 
Figure 1: Wiring Diagram for MPS-330 Switching Power Supply

.

Note

All the relevant wiring to controller will be connected on the Connector PCB, separate from the switching power supply unit.

Only the battery charger wires will be connected directly to the switching power supply unit.

Date Documentation:

6/2/2020

PROOF-READ

.

Related Articles.

Containing the label "mps-330"

Filter by label

There are no items with the selected labels at this time.

.

.

© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.