How to Set Door Open Time in xPortalNet Software

Problem (Issue) Statement:	How to set Door Open Time in xPortalNet software
Description:	This article will guide users to set Door Open Time in xPortalNet software.
Related Software:	xPortalNet
Related Hardware:	NIL
System Application:	NIL
Symptom and Finding:	NIL
Cause:	For first time guide to set Door Open Time in xPortalNet software.
Solution:	Warning! Users are not recommended to run any xPortal software in Windows XP* operating system as the system is unstable* Users are also advised to stop the xPortal Services before shutting down the Server PC* to prevent any missing transaction issues.* . . Summary: To set Door Open Time in xPortalNet software. Step-by-step Guide: To set Door Open Time in xPortalNet software: Step 1: Go to xPortalNet Client > Data Setup > System Setting > Door > select the door to be modified > Modify. The Edit Door window will be shown. Configure the Door Open Time field as required. Click OK to save the changes. Figure 1: Door Open Time Field in Edit Door Window . Note The Door Open Time setting is the duration where the door will remain open after an access is granted. After the Door Open Time duration has pass, the buzzer will then beep to indicate that the door has been left open. Default value: 10 sec ; Min value: 0 sec ; Max value: 99 sec If the Door Open Time is configured as "0", the door can be left open and the buzzer will not beep.
Common Issue	NIL
Date Documentation:	13/3/2020 (Rev 1.0)

PROOF-READ

.

Technical Knowledge Base