How to Continue the Mifare Card Programming Process if the Software Prompted "The Bulk Write Card Task has been Halted due to Error" Message

Owned by Tan Rong Wei (Unlicensed)
Last updated: Oct 10, 2019
2 min read
Problem (Issue) Statement:How to continue the Mifare card programming process if the software prompted "The bulk write card task has been halted due to error" message
Description:

This article will guide users on how to continue the Mifare card programming process if the software prompted "The bulk write card task has been halted due to error" message.

Info

This steps highlighted in this article can only be followed if the "Halt processing if exception trapped" checkbox is ticked. Refer to the following screenshot:

Figure 1: The Checkbox for "Halt processing if exception trapped"

Related Software:
  • xPortal3000
Related Hardware:
  • Plato-C80KLS
  • Plato-C80S
System Application:NIL
Symptom and Finding:

During the process of programming the Mifare cards, the software prompted the following error mesage:
The bulk write card task has been halted due to error Message
Figure 2: "The bulk write card task has been halted due to error" Message

Cause:
  • The error is prompted due to the Mifare card not being placed properly on the desktop programming reader during the card programming process
  • The programming reader is unable to detect the Mifare card during the programming process.

Summary:

  • Restarting the Mifare card programming process.

.

Warning!

  • Users are not recommended to run any xPortal software in Windows XP operating system as the system is unstable

  • Users are also advised to stop the xPortal Services before shutting down the Server PC to prevent any missing transaction issues.

.

.

Info

This steps highlighted in this article can only be followed if the "Halt processing if exception trapped" checkbox is ticked. Refer to the following screenshot:

Figure 3: The Checkbox for "Halt processing if exception trapped"

.

.

Step-by-step Guide:

  • Restarting the Mifare card programming process:

Step 1: Upon the software prompting the error message, click OK to dismiss the error message.

.

Step 2: Click Restart for Fail Cases to restart the programming process.

.

Step 3: The software will then prompt the users to place the card again.
Please place a card for enrolment Message|
Figure 4: "Please place a card for enrolment" Message

.

Step 4: Place the affected card properly on the programming reader. Do not lift or move the card until the enrolment is completed successfully.

Common Issues:

NIL

Porting Date:10/10/2019

PROOF-READ

.

Related Articles.

Containing the label "mifare-sector-programming"

Filter by label

There are no items with the selected labels at this time.

.

.

© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.