How to Connect Fire Alarm Signal to XP-QNET Controller

Problem (Issue) Statement:	How to connect Fire Alarm Signal to XP-QNET controller
Description:	A guide to connect Fire Alarm Signal to XP-QNET controller
Related Software:	xPortalNet HS PS v2.0.1.4
Related Hardware:	XP-QNET v2.04
System Application:	Door Access System Lift Masking Access System Vehicle Access System
Symptom and Finding:	NIL
Cause:	For first time guide to connect Fire Alarm Signal to XP-QNET controller,
Solution:	Summary: To connect fire alarm signal to XP-QNET controller. . Step by Step: To connect fire alarm signal to XP-QNET controller: Step 1: Please refer to the wiring diagram: XP-QNET controller to Fire Alarm signal connection. Figure 1: Fire Alarm Signal Connection to XP-QNET Controller Note For normal operations, fire alarm termination requires Normally Opened (NO) dry contact on XP-QNET controller to deactivate fire alarm mode. To trigger the fire alarm, the fire alarm panel needs to send a Normally Closed (NC) dry contact to XP-QNET controllers to activate the fire alarm mode.
Common Issues:	NIL
Date Documentation:	5/8/2020 (Rev 2.0)

PROOF-READ

.

Technical Knowledge Base