How to Connect Fire Alarm Signal to XP-QNET Controller

Owned by Tan Rong Wei (Unlicensed)
Last updated: Sept 29, 2020
1 min read

Problem (Issue) Statement:

How to connect Fire Alarm Signal to XP-QNET controller

Description:

A guide to connect Fire Alarm Signal to XP-QNET controller

Related Software:

  • xPortalNet HS PS v2.0.1.4

Related Hardware:

  • XP-QNET v2.04

System Application:

  • Door Access System
  • Lift Masking Access System
  • Vehicle Access System

Symptom and Finding:

NIL

Cause:

For first time guide to connect Fire Alarm Signal to XP-QNET controller,

Solution:

Summary:

  • To connect fire alarm signal to XP-QNET controller.

.

Step by Step:

  • To connect fire alarm signal to XP-QNET controller:

Step 1: Please refer to the wiring diagram: XP-QNET controller to Fire Alarm signal connection.
Fire Alarm Signal Connection to XP-QNET Controller
Figure 1: Fire Alarm Signal Connection to XP-QNET Controller


Note

  • For normal operations, fire alarm termination requires Normally Opened (NO) dry contact on XP-QNET controller to deactivate fire alarm mode.
  • To trigger the fire alarm, the fire alarm panel needs to send a Normally Closed (NC) dry contact to XP-QNET controllers to activate the fire alarm mode.

Common Issues:

NIL

Date Documentation:

5/8/2020 (Rev 2.0)

PROOF-READ

.

Related Articles.

Containing the label "xp-qnet"

Filter by label

There are no items with the selected labels at this time.

.

.

© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.