How to Assign XP-QNET Controller to Function as Lift Controller
Problem (Issue) Statement: | How to Assign XP-QNET Controller to Function as Lift Controller? |
Description: | A guide to assign XP-QNET controller to function as lift controller. |
Related Software: |
|
Related Hardware: |
|
System Application: |
|
Symptom and Finding: | NIL |
Cause: | For first time guide to assign XP-QNET controller to function as lift controller. |
Solution: | Summary:
. Step-by-Step Guide:
Step 1: Press & hold COLDSTART button on XP-QNET board. . Step 2: Press & release RESET button on XP-QNET board. . Step 3: Wait for STAT & CPU LED light up together. . Step 4: Release COLDSTART button. . Note Users are advised to perform ColdStart operation once after every first time power up of the controller; or when advised to do so by the technical support. . .
Step 1: Turn "ON" DIP switch 1 under controller SETTING on XP-QNET controller. . Step 2: The following table explains the functions of the DIP switches for controller SETTING on the XP-QNET controller. . Step 3: After configuring the DIP switches, press "RESET" on the XP-QNET controller to reset the controller in order for the new settings to take effect. |
Common Issues: | NIL |
Date Documentation: | 17/9/2020 (Rev 1.0) |
PROOF-READ
.
.
.
© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.