How to Configure Plato QR Reader Address Settings

Owned by Tan Rong Wei (Unlicensed)
Last updated: Sept 29, 2020

Problem (Issue) Statement:

How to configure Plato QR Reader Address settings

Description:

A guide to configure Plato QR Reader Address settings

Related Software:

  • xPortalNet HS PS v2.0.1.4

Related Hardware:

  • XP-QNET v2.04
  • XP-MK820 v2.03

System Application:

  • Lift Masking Access System
  • Door Access System

Symptom and Finding:

NIL

Cause:

For first time guide to configure Plato QR Reader Address

Solution:

Summary:

  • To configure Plato QR Reader Address via QR Code.


Step-by-step Guide:

  • To configure Plata QR Reader Address via QR Code:

Step 1: Power up the Plato QR reader (Connect VPP and GND).

.

Step 2: Prepare the respective QR codes for the corresponding Address to change the Plato QR Reader address setting.

.

Tips

Other QR Code Addresses will be released soon.

.

.

Step 3: User may refer to the table below to assign the required address for the respective Plato QR reader.

.

Step 4: Hold 1-2 seconds the target QR code for the Address towards the QR Code scanner on the Plato QR reader.

.

Step 5: Once the Plato QR reader detected the QR code for the address, the Plato QR reader will produce a beep sound.

Note

Please ensure that the QR Code is placed at the center of the QR code scanner. The built-in flash light will automatically be turned on when the camera is reading the target QR code.

Common Issues:

NIL

Date Documentation:

7/8/2020 (Rev 1.0)

PROOF-READ

.

Related Articles.

Containing the labels "q80ms"

Filter by label

There are no items with the selected labels at this time.

.

.

© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.