How to Connect XP-QNET Controller to XP-SNET-E32R Extension Board for Lift Masking System Application

Owned by Tan Rong Wei (Unlicensed)
Last updated: Sept 29, 2020
1 min read

Problem (Issue) Statement:

How to connect XP-QNET controller to XP-SNET-E32R extension board for Lift Masking System Application

Description:

A guide to connect XP-QNET controller to XP-SNET-E32R extension board for Lift Masking System Application.

Related Software:

NIL

Related Hardware:

  • XP-SNET-E32R

System Application:

  • Lift Masking Access System

Symptom and Finding:

NIL

Cause:

For first time guide to connect XP-QNET controller to XP-SNET-E32R extension board for Lift Masking System Application.

Solution:

Summary:

  • To connect XP-SNET-E32R extension board to XP-QNET Controller.

.

Step-by-step Guide:

  • To connect XP-SNET-E32R extension board to XP-QNET Controller:

Step 1: Please refer to the wiring diagram: XP-QNET controller to XP-SNET-E32R extension board. 
XP-QNET Controller Connection to XP-SNET-E32R Extension Board 
Figure 1: XP-QNET Controller Connection to XP-SNET-E32R Extension Board

.

Step 2: The table below indicates the XP-SNET-E32R address setting and the corresponding relay number range available for floor zone setting in the software.

Common Issues:

NIL

Date Documentation:

25/8/2020 (Rev 1.0)

PROOF-READ

.

Related Articles.

Containing the label "xp-qnet"

.

.

© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.