How to Configure CCTV Integration with xPortalNet for Event Trigger

Problem (Issue) Statement:	How to configure CCTV integration with xPortalNet for event trigger
Description:	A guide to configure xPortalNet software for CCTV integration for the CCTV module.
Related Software:	/wiki/spaces/SRN/pages/97354177
Related Hardware:	Add-on CCTV module USB dongle license
System Application:	Access Control System with CCTV integration
Symptom and Finding:	NA
Cause:	For first time configuration on the xPortalnet software to use with CCTV integration module.
Solution:	Warning! Users are not recommended to run any xPortal software in Windows XP* operating system as the system is unstable* Users are also advised to stop the xPortal Services before shutting down the Server PC* to prevent any missing transaction issues.* . . Summary To configure DVR connection setup. To configure Camera setup. Note Please ensure that the xPortalNet software is properly installed and running with all respective Connection, Controller, and Door settings already configured. Please ensure that the CCTV module dongle license is plugged into the xPortalNet Server PC and the PC is able to detect the dongle license. Step-by-step Guide: To configure DVR Connection Setup: Step 1: Go to xPortalNet Client > Data Setup > System Setting > DVR. Figure 1: Add DVR Connection Window Step2: Click OK to confirm and save changes. To configure CCTV Camera and Event Trigger Setup: Step 1: Go to xPortalNet Client > Data Setup > System Setting > CCTV camera. Click Add. Figure 2: CCTV Camera Setup Window Step 2: Fill up the camera information as highlighted in the red window and click Add. Figure 3: Add CCTV Camera Window Step 3: The Add CCTV Camera Event Trigger window will be shown. Fill up the details in the respective fields with the triggering events. Figure 4: Add CCTV Camera Event Trigger Window Step 5: Click OK to confirm and save the changes.
Date Documentation:	2/4/2018 (Rev 1.0)