$customHeader
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Problem (Issue) Statement:

How to connect XP-QNET controller to XP-SNET-E32R extension board for Lift Masking System Application

Description:

A guide to connect XP-QNET controller to XP-SNET-E32R extension board for Lift Masking System Application.

Related Software:

NIL

Related Hardware:

  • XP-SNET-E32R

System Application:

  • Lift Masking Access System

Symptom and Finding:

NIL

Cause:

For first time guide to connect XP-QNET controller to XP-SNET-E32R extension board for Lift Masking System Application.

Solution:

Summary:

  • To connect XP-SNET-E32R extension board to XP-QNET Controller.

.

Step-by-step Guide:

  • To connect XP-SNET-E32R extension board to XP-QNET Controller:

Step 1: Please refer to the wiring diagram: XP-QNET controller to XP-SNET-E32R extension board. 
XP-QNET Controller Connection to XP-SNET-E32R Extension Board 
Figure 1: XP-QNET Controller Connection to XP-SNET-E32R Extension Board

.

Step 2: The table below indicates the XP-SNET-E32R address setting and the corresponding relay number range available for floor zone setting in the software.

Common Issues:

NIL

Date Documentation:

25/8/2020 (Rev 1.0)

PROOF-READ

.

Related Articles.

Containing the label "xp-qnet"

  • No labels
$customFooter