How to Configure XP-SNET Controller for Global Antipassback (GAC) Application

Owned by Tan Rong Wei (Unlicensed)
Last updated: Dec 31, 2020
2 min read

Problem (Issue) Statement

How to configure XP-SNET Controller for Global Antipassback (GAC) Application

Description:

A guide to configure XP-SNET controller for Global Antipassback (GAC) application


Note

XP-SNET-GAC controller is only supported for LAN Network Communications only.

.

Tip

Controller models supported as GAC Client: XP-SNETv3.36, XP-SNETv4, XP-M2000i v6.10 and above, and XP-M1000i v6.00 and above.

Related Software:

  • xPortalNet v1.5.0.90 above

Related Hardware:

  • XP-SNET_GAC v2.24
  • XP- SNETv2 v3.36 and above

System Application:

  • Global Antipassback feature

Symptom and Finding:

NIL

Cause:

A guide to configure XP-SNET controller for Global Antipassback (GAC) application.

Solution:

Warning!

XP-SNET-GAC currently do not support odd numbered card lengths, e.g. 5, 7, 9 card number lengths.

Summary:


Step-by-step Guide:

  • To perform ColdStart for first power up:

Step 1: Press & hold COLDSTART button on XP-SNET board.


Step 2: Press & release RESET button on XP-SNET board.


Step 3: Wait for STAT & CPU LED to light up simultaneously.


Step 4: Release COLDSTART button.


Note

User are advised to perform ColdStart operation once after every first time power up of the controller; or when advised to do so by the technical support.



  • To perform pre-configuration setting for the network connection:

Knowledge Base Link

User may refer How to Pre-configure Network Connection for IP Controllers to complete the process.



  • To configure IP Address for XP-SNET:

Knowledge Base Link

User may refer How to Configure IP Address for IP Controllers to complete the process.



  • To configure XP-SNET-GAC IP Address as the Master IP Address:

Knowledge Base Link

This configuration process must be configured on XP-SNET controllers with firmware v3.71 or lower.


Step 1: After completing the process to configure the IP address. Users should scroll down the Network Setting page.


Step 2: Configure the Master Controller IP Address and Master Controller Port as XP-SNET-GAC's IP address and communication port respectively. Click Submit to save the changes made.
Configuring Master Controller IP Address and Master Controller Port
Figure 1: Configuring Master Controller IP Address and Master Controller Port

Common Issue

NIL

Date Documentation:

3/10/2018 (Rev 1.0)

PROOF-READ

.

Related Articles.

Containing the label "antipassback-configuration"

.

.

© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.