$customHeader
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Problem (Issue) Statement:

How to configure event trigger for CCTV integration with xPortalNet HS PS v2.0 Client software?

Description:

To configure event trigger for CCTV integration with xPortalNet HS PS v2.0 Client software.

Related Software:

  • xPortalNet HS PS v2.0.1.5

Related Hardware:

  • Add-on CCTV integration USB module
  • Hanwha Techwin NVR- PRN-4011
  • Wisenet IP Camera- QNo-6012R

System Application:

Access Control System with CCTV integration

Symptom and Finding:

NA

Cause:

For first guide to configure event trigger for CCTV integration with xPortalNet HS PS v2.0 Client software.

Solution:

Summary:

  • To configure CCTV Camera for event trigger

.

Note

  • Please ensure that the xPortalNet HS PS Server v2.0 software is properly installed and running with all respective Connection, Controller and Door setting already configured.
  • Please ensure that the CCTV module dongle license is plugged into the xPortalNet HS PS Server PC and xPortalNet HS PS Service v2.0 is able to detect the dongle license.

.

Step-by-Step Guide:

  • To configure CCTV Camera for event trigger:

Step 1: Go to xPortalNet Client > Data Setup > System Setting > CCTV Camera Setup. The CCTV Camera Setup window will be shown as below.
CCTV Camera Setup Window 
Figure 1: CCTV Camera Setup Window

.

Step 2: Select the specific camera used to configure the event trigger and click Modify to continue.
Selecting the CCTV Camera for Configuration of Event Trigger 
Figure 2: Selecting the CCTV Camera for Configuration of Event Trigger

.

Step 3: The Edit CCTV Camera window will be shown. At the Events Trigger section, click Add to continue.
Add Button in Events Trigger Section 
Figure 3: Add Button in Events Trigger Section

.

Step 4: Next, the Add CCTV Camera Event Trigger widow will be shown. Fill in all information accordingly.
Add CCTV Camera Event Trigger Window 
Figure 4: Add CCTV Camera Event Trigger Window

.

.

Step 5: Click OK to save change.

.

Step 6: The xPortalNet HS PS Client will prompt the following message to indicate that the Record Added. Click OK to exit.
Record Added Window 
Figure 5: Record Added Window

Date Documentation:

25/1/2018 (Rev 1.0)

PROOF-READ

.

  • No labels