Technical Knowledge Base

All content
Space settings

Results will update as you type.

•
How to Configure Fire Alarm Door Release and Fire Alarm Group at xPortalNet
•
The Door Code Information Mismatched with Door Name in Door Accessibility Schedule
•
Flashed Valid Card to Lift Reader but Unable to Select Floor Buttons
•
Unable to Open xPortal3000 after Fresh Installation
•
Generated Daily Attendance Report Shows All Staffs Attendance Summary as "Absent"
•
How to Configure and Terminate Wiring Connection to Monitor Emergency Break Glass Status on XP-M1000i and XP-M2000i
•
After Installing HID Omnikey 3121 driver, Users Still Unable to Read MyKad Details with the 'No card detected' Message Prompted
•
When Users Flashed a Programmed Mifare Sector Card with Card ID, Software Shown "Unknown Card Number" Transaction and the Card User is Unable to Access the Door
•
After Configuring Polling Agent Software, the Controller Status is Shown as 'Down'
•
User Flashed Visitor Card Without a Specific Door Access Level but Still Able to Access the Restricted Door
•
How to Setup xPortal Communication Gateway (Polling Agent) Software
•
How to Enable or Install Microsoft .NET Framework 3.5 on Windows 10, Windows 8.1, Windows 8 or Windows 7
•
How to Enable or Install Microsoft .NET Framework 4.5 on Server 2012, Windows 8.1, Windows 8 or Windows 7
•
How to Install Microsoft SQL Server 2012
•
Why xPortal Communication Gateway (Polling Agent) software always stops working after running for a while
•
How to Configure Lift Access Control at xPortalNet Server
•
How to Restore xPortalNet Database (with .bak file) to new Server's PC
•
How to relocate existing xPortalNet Database (with .bak file) to a New PC
•
How to Perform Pre-requisite Installation for xPortalNet Software to Integrate with Samsung NVR CCTV System
•
How to Perform Pre-requisite Installation for xPortalNet Software to Integrate with Panasonic NVR CCTV System
•
How to Install xPortalNet Software
•
How to Create Floor Zone and Floor Accessibility at xPortalNet Client
•
How to Configure CCTV Integration with xPortalNet for Event Trigger
•
How to Backup xPortalNet Database into .bak File Format
•
How to Pre-configure Network Connection for IP Controllers
•
How to Configure IP Address for IP Controllers
•
How to Configure IP Address for XP-GTR1500 or XP-GT3500 Controller
•
How to Connect XP-GTR1500 Controller and Door Accessories with MAS-RBU Relay Board
•
How to Connect XP-GT3500 Controller and Door Accessories with MAS-RBM Relay Board
•
How to Connect 2 Units XP-GT3500 Controller and Door Accessories with MAS-RBM for Single Door Access with Fingerprint Reader on Both Entry and Exit Directions
•
How to Connect Fire Alarm Signal for XP-GT3500 or XP-GTR1500 Controllers
•
How to Configure RS485 Address for XP-GT3500 or XP-GTR1500 Controller
•
How to Configure RS485 Address for XP-M1000i or XP-M1300i Controller
•
How to Connect XP-M1000i or XP-M1300i Controller to Door Accessories
•
How to Connect XP-M2000i or XP-M2300i Controller to Door Accessories
•
How to Connect XP-M1000i or XP-M1300i controller to Plato Reader
•
How to Connect XP-M2000i or XP-M2300i Controller to Plato Reader
•
How to Configure RS485 Address for XP-M2000i or XP-M2300i controller
•
How to Connect Multiple XP-M1000i or XP-M1300i Controllers to Server PC via RS485 Network
•
How to Connect Fire Alarm to XP-M1000i or XP-M1300i or XP-M2000i or XP-M2300i Controller
•
How to Connect Multiple XP-M2000i or XP-M2300i Controllers to Server PC via RS485 Network
•
How to Configure Connection, Controller, and Door Settings for XP-M1000i or XP-M1300i Controller with xPortal3000 Software
•
How to Configure Connection, Controller, and Door Settings for XP-M1000i or XP-M1000i-SE21 Controller with xPortalNet Software
•
How to Configure Connection, Controller, and Door Settings for XP-SNET controller with xPortalNet Software
•
How to Connect Third Party Readers Directly to TTL Port on XP-SNET Controller and Configure Door Settings in xPortalNet sofware
•
How to Connect Plato Readers Directly to XP-SNET Controller and Configure Door Settings in xPortalNet Software
•
How to Connect Third Party Readers to MK800E Reader Interface Module, and to Connect MK800E to XP-SNET Controller as well as to Configure Door Settings in xPortalNet Software
•
How to Connect Plato Readers to MK800E Reader Interface Module, and to connect MK800E to XP-SNET Controller as well as to Configure Door Settings in xPortalNet Software
•
How to Configure Connection, Controller, and Door Settings for XP-M2000i or XP-M2300i Controller with xPortalNet Software
•
How to Configure Connection, Controller, and Door Settings for XP-M2000i or XP-M2300i Controller with xPortal3000 Software
•
How to Configure Plato Reader's DIP Switch Address Settings
•
How to Assign XP-SNET Controller to Function as Lift Controller
•
How to Connect XP-SNET Controller to XP-SNET-E32R Extension Board for Lift Masking System Application
•
How to Configure Jumper Settings for XP-SNET-E32R Output Relays
•
How to Configure Input and Output Settings for XP-SNET-E248 Extension Board
•
How to Connect XP-SNET Controller with XP-SNET-E248 or XP-SNET-E32R Extension Board for Alarm Monitoring System Application
•
How to Configure Address Unit No on XP-SNET-E32R Extension Board
•
How to Configure Address Unit no on XP-SNET-E248 Extension Board
•
How to Setup Alarm Monitoring System Application Using XP-SNET Controller at xPortalNet Server
•
How to Configure Instruction Control for Alarm Monitoring System Application at xPortalNet Client
•
Why Certain Existing Card Users are Suddenly Unable to Access Doors and Software Transaction Log Shows "Unknown Card Number" Transaction
•
How to Copy the xPortalNet Database Data Files (MDF & LDF File Types)
•
How to Replace xPortalNet Database with Database Data Files (MDF and LDF File Types)
•
How to Gain Access to Program Data Folder in Server PC
•
How to Detach xPortalNet database from SQL Server
•
How to Attach xPortalNet Database to SQL Server
•
How to Configure Fire Alarm Auto Release for All Doors at xPortal3000
•
Why XP-SNET-E248 Extension Board Status is Not Shown as UP
•
How to Add Card User at the XP-GT3500 or XP-GTR1500 Controller
•
How to Add Card User in xPortalNet Software
•
How to Add Card User in xPortal3000 Software
•
How to Configure Door Access Level at xPortalNet Software
•
How to Configure Door Access Level at xPortal3000 software
•
How to Configure Time Zone Settings in xPortalNet Software
•
How to Configure Time Zone Settings in xPortal3000 Software
•
How to Configure Time Set Settings in xPortalNet Software
•
How to Configure Time Set settings in xPortal3000 Software
•
How to Add or Enrol Fingerprint Template at the XP-GT Controller
•
Why does the Connected Suprema BioMini Fingerprint Reader Not Able to Capture Fingerprint
•
How to Enrol Fingerprint Template at xPortalNet or xPortal3000 Software
•
How to Download or Retrieve Fingerprint Template Enrolled in XP-GT Controller to xPortalNet or xPortal3000 Software Database
•
How to Install Fingerprint Template from One XP-GT Controller to Another XP-GT Controller
•
How to Enable Visitor Auto Sign Out Feature at xPortalNet
•
How to Setup Visitor Management System on xPortalNet Software

You‘re viewing this with anonymous access, so some content might be blocked.

/

Unable to Open xPortal3000 after Fresh Installation

Unable to Open xPortal3000 after Fresh Installation

Owned by Wan Lin Lee

Last updated: Dec 29, 2020 by Tan Rong Wei (Unlicensed)

Loading data...