How to Configure Plato Reader's DIP Switch Address Settings

Owned by Tan Rong Wei (Unlicensed)
Last updated: Dec 30, 2020
1 min read

Problem (Issue) Statement:

How to configure Plato reader's DIP switch address settings

Description:

A guide to configure Plato reader DIP switch address settings.

Related Software:

  • xPortalNet Lite
  • xPortalNet Standard
  • xPortalNet PS
  • xPortal3000

Related Hardware:

  • Plato Reader Series

System Application:

  • Door Access System

Symptom and Finding:

NA

Cause:

For first time configuration on Plato reader DIP switch address settings.

Solution:







Summary

  • To configure DIP switch for the address settings on Plato reader.

Step-by-step guide:

  • To configure DIP switch for the address settings on Plato reader:

Step 1: Refer to the DIP switch configuration for address settings on Plato reader as shown below:
Address Settings Configuration for Plato Readers
Figure 1: Address settings configuration for Plato readers


Note

DIP switches 5 & 6 are not used.



Step 2: The table below shows a simple example to assign the address setting for a Plato reader on Door 2:

Date Documentation:

18/5/2018  (Rev 1.0)

PROOF-READ

.

Related Articles.

Containing the label "plato-reader"

.

.

© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.