Problem (Issue) Statement: | How to connect XP-GLS5000 controller with XP-SNET-E248 or XP-SNET-E32R Extension Board for Alarm Monitoring System Application |
Description: | A guide to connect XP-GLS5000 controller to XP-SNET-E248 / XP-SNET-E32R extension board for Alarm Monitoring System application. |
Related Software: |
|
Related Hardware: |
|
System Application: |
|
Symptom and Finding: | NA |
Cause: | For first time guide to connect XP-GLS5000 controller to XP-SNET-E248 / XP-SNET-E32R extension board for Alarm Monitoring System application. |
Solution: | Summary:
Step 1: Please follow the wiring diagram as shown below: Note
. . .
Step 1: For XP-SNET-E248 extension board. Knowledge Base Link Users may refer to How to Configure Address Unit no on XP-SNET-E248 Extension Board for the complete procedures to configure address settings for XP-SNET-E248. . . Users may refer to How to Configure Address Unit No on XP-SNET-E32R Extension Board for the complete procedures to configure address settings for XP-SNET-E32R. . .
Step 1: Please ensure that door setting has sent to XP-GLS5000 controller. Users may refer to How to Send or Download Data to the Controller for the complete procedures to send door settings to the controller. . .
|
Date Documentation: | 27/5/2018 |
PROOF-READ
.
.
.