Skip to end of metadata
Go to start of metadata
Problem (Issue) Statement: | How to connect XP-GLS5000 controller to XP-SNET-E32R extension board for Lift Masking System application |
Description: | A guide to connect XP-GLS5000 controller to XP-SNET-E32R extension board for Lift Masking System application |
Related Software: | - xPortalNet HS v1.8.0.7 and above
|
Related Hardware: | - XP-GLS5000 v1.16
- XP-SNET-E32R
|
System Application: | - Lift Masking System application
|
Symptom and Finding: | NA |
Cause: | For first time connection between XP-GLS 5000 controller with XP-SNET-E32R extension board for Lift Masking System application. |
Solution: | Summary Step by step Guide:
Step 1: Ensure that the XP-GLS5000 controller is configured to Lift Controller Mode.
To connect XP-SNET-E32R extension board to XP-GLS 5000 controller:
Step 1: Please follow the wiring diagram as shown below.
Figure 1: Wiring Diagram between 4 XP-SNET-E32R Extension Boards to XP-GLS5000 Controller Step 2: The table below indicates the XP-SNET-E32R address settings and the corresponding relay number ranges available for floor zone settings in the software.
|
Common Issues: | Nil |
Date Documentation: | 15/1/2019 |
PROOF-READ
.
Related Articles.
Containing the label "xp-gls5000" AND "lift-access-mode"
Filter by label
There are no items with the selected labels at this time.
.
.