Problem (Issue) Statement: | How to connect XP-SNET controller with XP-SNET-E248 / XP-SNET-E32R extension board for Alarm Monitoring System application | ||||||
Description: | A guide to connect XP-SNET controller to XP-SNET-E248 / XP-SNET-E32R extension board for Alarm Monitoring System application. | ||||||
Related Software: | NA | ||||||
Related Hardware: |
| ||||||
System Application: |
| ||||||
Symptom and Finding: | NA | ||||||
Cause: | For first time connection between XP-SNET controller with XP-SNET-E248 / XP-SNET-E32R extension board for Alarm Monitoring System application. | ||||||
Solution: |
. . Summary
Step-by-step Guide:
Step 1: Please follow the wiring diagram as shown below:
. .
. . Step 2: Users can proceed to configure the address settings for the extension boards to facilitate communication in the network. . .
Step 1: For XP-SNET-E248 extension board,
. . Step 2: For XP-SNET-E32R extension board,
. .
Step 1: On the XP-SNET controller, ensure that both D33 & D34 LEDs in the "Downlink" section (lower left section of XP-SNET controller) is blinking to indicate that the XP-SNET controller has successfully established communication with the XP-SNET-E248 / XP-SNET-E32R extension board. . Step 3: Download the door settings to the controller to perform the full functional tests for the system.
| ||||||
Date Documentation: | 19/6/2018 (Rev 1.1) |
.
|
.
.