Skip to end of metadata
Go to start of metadata
Problem (Issue) Statement: | How to connect XP-M4L controller to card readers |
Description: | A guide to connect XP-M4L controller with card readers.
XP-M4L controller is able to support three (3) different ways to connect to card readers: 1. Connect to Plato readers directly 2. Connect to readers via XP-MK800E 3. Connect to third party readers directly |
Related Software: | |
Related Hardware: | - XP-M4L v4.01
- XP-E32R v2.03
|
System Application: | - Lift Masking Access System
|
Symptom and Finding: | NA |
Cause: | For first time connection between XP-M4L controller with reader. |
Solution: | Summary Step-by-step Guide:
To connect XP-M4L controller to Plato readers directly:
Step 1: Please follow the wiring diagram as shown below: Figure 1: Wiring Diagram to Connect XP-M4L Controller to Plato Readers Directly Step 2: The table below indicates the Plato reader address settings and the corresponding lift panel number.
To connect XP-M4L controller to readers via XP-MK800E:
Step 1: Please follow the wiring diagram as shown below: Figure 2: Wiring Diagram to connect XP-M4L Controller to XP-MK800E Step 2: The table below indicates the XP-MK800E address settings and the corresponding lift panel number.
To connect XP-M4L controller to third party readers directly:
Step 1: Please follow the wiring diagram as shown below:
Figure 3: Wiring Diagram to connect XP-M4L Controller to Third Party Readers Directly
|
Date Documentation: | 17/7/2018 (Rev 1.0) |
PROOF-READ
.
Related Articles.
Containing the label "xp-m4l"
Filter by label
There are no items with the selected labels at this time.
.
.