Skip to end of metadata
Go to start of metadata
Problem (Issue) Statement: | How to check network connection using Command Prompt to ping controller IP Address |
Description: | This article will guide users to check network connection using Command Prompt to ping controller IP Address. |
Related Software: | |
Related Hardware: | NIL |
System Application: | NIL |
Symptom and Finding: | |
Cause: | For first time guide to check network connection using Command Prompt to ping controller IP Address. |
Solution:
| . . Summary:To check network connection using Command Prompt to ping controller IP Address.
Step-by-step Guide:
To check network connection using Command Prompt to ping controller IP Address:
Step 1: At the xPortal Server PC, launch Command Prompt software application. . . Step 2: Type the following command into the Command Prompt window. If the Command Prompt showed response according to Figure 1, it means that the xPortal Server PC is able to communicate with the controller.
ping "controller IP Address"
. Figure 1: Command Prompt Showing the Ping Received from the IP Address
. If the Command Prompt showed response according to Figure 2 or Figure 3, it means that the xPortal Server PC is unable to communicate with the controller.
Figure 2: Command Prompt Showing the Destination Host Unreachable Message . Figure 3: Command Prompt Showing the Request Timed Out Message
|
Common Issue | NIL |
Date Documentation: | 30/3/2020 (Rev 1.0) |
PROOF-READ
.
Related Articles.
Containing the label "command-prompt"
Filter by label
There are no items with the selected labels at this time.