How to Configure Door Settings for XP-SNET-E5D Extension Board with xPortalNet Software

Summary:

• General overview of TTL ports on the XP-SNET-E5D extension board.

.

Step-by-step Guide:

• General overview of TTL ports on the XP-SNET-E5D extension board:

Step 1: Ensure that the Connection and Controller setup has been completed.

.

.

Step 2: For Alarm Controller Setup, go to Server Admin > System Device Setup > Alarm Controller. The Alarm Controller Setup window shown as below:

Figure 1: Alarm Controller Setup Window

.

Step 3: Click Add to add new Alarm Controller for XP-SNET-E5D extension board.

Figure 2: Clicking Add on Alarm Controller Setup Window

.

Step 4: The Add Alarm Controller window will be shown as below. Fill in the respective field and click OK to save changes.

Figure 3: Add Alarm Controller Window

.

.

Step 5: The following message window will be prompted to show that Record is Added. Click OK to continue.

Figure 4: Record Added Window

.

Step 6: For Door Setup go to Server Admin > System Device Setup > Door. The Door Setup window shown as below:

Figure 5: Door Setup Window

.

Step 7: Click Add to add new Alarm Controller for XP-SNET-E5D extension board.

Figure 6: Clicking Add on Door Setup Window

.

Step 8: The Add Door window will be shown as below. Fill in the respective field and click OK to save changes.

Figure 7: Add Door Window

.

.

Example:

.

Step 9: The following message window will be prompted to show that Record is Added. Click OK to continue.

Figure 8: Record Added Window 

.

Step 10: Go xPortalNet Client > Device Comm > Send Door Setting. Select specified controller and click Send all setting to download all door configuration.