$customHeader
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Problem (Issue) Statement:

How to troubleshoot the issue where the Mifare Card ID Number is not shown in xPortal3000 software

Description:

Users are unable to read Mifare Card ID number using the Read Card feature in Staff Detail Setup window.

Related Software:
  • xPortal3000
Related Hardware:NIL
System Application:NIL
Symptom and Finding:

When users attempt to read the Mifare Card ID using the card reader, the xPortal3000 software showed the following message windows:
Card Number Field is Blank in the Message Window
Figure 1: Card Number Field is Blank in the Message Window

.

Card Number Detected Field is Blank in the Message Window
Figure 2: Card Number Detected Field is Blank in the Message Window

Cause:The Card ID number is yet to be programmed into the Mifare card. The Mifare card does not contain any ID data.

Summary:

  • To write the Card ID number to the Mifare card.

.

.

Step-by-step Guide:
  • To write the Card ID number to the Mifare card:

Step 1: Users have to first write the Card ID number to the Mifare card.

Knowledge Base Link

Users may refer to How to Setup Mifare Sector Programming Key and Read & Write Mifare Card ID Number in xPortal3000 Software for the complete steps on how to write Card ID to Mifare cards.

Common Issues:

NIL

Porting Date:30/10/2019

PROOF-READ

.

Related Articles.

Containing the label "mifare-sector-reading"

Filter by label

There are no items with the selected labels at this time.

  • No labels