Problem (Issue) Statement: | How to configure the QR Code settings in xPortalNet software. | ||||||||||||||||||||
Description: | This article will guide a technical user or system admin to configure the QR Code settings in xPortalNet software. | ||||||||||||||||||||
Related Software: |
| ||||||||||||||||||||
Related Hardware: |
| ||||||||||||||||||||
System Application: | NIL | ||||||||||||||||||||
Symptom and Finding: | NIL | ||||||||||||||||||||
Cause: | For first time guide to configure the QR code settings in xPortalNet software. | ||||||||||||||||||||
Solution: |
Summary:
Step-by-step Guide:
Step 1: Login to xPortalNet Server software. Then, go to Server Admin > System Properties. Step 2: The System Properties window will be shown. Click Modify. Step 3: The Edit System Properties window will then be shown. Go to Miscellaneous > QR Code. Step 4: Configure the QR Code settings according to the table as shown below, wherever necessary. .
. .
. . Step 5: Save the QR Code settings by clicking OK. Step 6: The “Record Updated!” message box will be shown. Click OK to continue. Step 7: Remember to download the door parameters to controller to apply the changes after configured the QR Code settings. .
Step 8: After downloading the door parameters, retrieve the door parameters to makes sure that the controller(s) are updated with the latest QR settings. (go to xPortalNet Client > Device Comm > Retrieve Device Setting) | ||||||||||||||||||||
Common Issues: | NIL | ||||||||||||||||||||
Documentation Date: | 17/05/2020 (Rev 1.0) |
Status | ||||||
---|---|---|---|---|---|---|
|
...
Section | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||
|
.
...
.
Choices for confluence | ||
---|---|---|
|