Summary
| Info |
|---|
|
Ensure that the HID OMNIKEY 5421 / 5422 card reader is correctly connected to the PC before proceeding with the following steps. |
.
.
.
.
Step-by-step Guide:
| Anchor |
|---|
| setupdesfire-98 |
|---|
| setupdesfire-98 |
|---|
|
To setup DESFire Credential Profile configuration at xPortalNet HS:
.
.
.
Step 1: Go to Data Setup > Access Data Setting > Staff Record > Get Now!
Step 2: The Staff Detail Setup window will be shown. Go to DESFire > DESFire Reader Setting.
Figure 1: DESFire Reader Settings Button in DESFire Icon
Step 3: The following message window will be shown to indicate that the software did not detect a serial port. Click OK to continue.
Figure 2: No Serial Port Detected Window
Step 4: The Reader Settings window will then be shown. Select "Third-Party" at the Reader Selection field and select "OMNIKEY CardMan 5x21-CL 0" at Model Name. Click OK to save the changes.
Figure 3: Reader Settings Window
.
.
To program / write Card ID number (Card No. field in Add Staff Detail window) into DESFire® card:
Step 1: Add a new staff / card user via the Add Staff Detail window. At the Card No. field, specify the card ID number to be programmed to the DESFire Card.
.
.
.
| Info |
|---|
|
To program card ID for an existing user, skip to step 2. |
.
.
Step 2: At the Staff Detail Setup window, select the card user to program the card ID (Card No. in Add Staff Detail window) and place the blank card on OMNIKEY card reader.
Figure 4: Staff Detail Setup Window
Step 3: Go to DESFire > Personalize Card > Access Card.
Figure 5: Access Card Button in DESFire Icon
Step 4: Software will begin to write Card No. into Mifare card sector. Wait for the process to complete.
Figure 6: Operation in Progress Window Showing that the DESFire Card Programming is Completed
Step 5: The Enrolment of DESFire card setting succeed message will then be shown. Click OK to continue.
.
.
To verify Card ID is correctly programmed into DESFire® card:
Step 1: Place the programmed DESFire card on OMNIKEY 5421/ 5422 card reader.
Step 2: Go to DESFire > Read Data > Access Card to read the DESFire card.
Figure 7: Read Access Card Data Operation
Step 3: Software will begin to read Card ID from the DESFire card. Wait for the process to complete.
Figure 8: Operation in Progress Window Showing that the Software is Reading the Card ID
Step 4: The read card information will be shown in the window below.
Figure 9: Details of the Read DESFire Card
