Summary:
Step-by-Step Guide:
Ensure that xPortalNet HS Services is Running:
Step 1: Open xPortalNet HS Comm Service.
Step 2: Ensure that the xPortalNet HS Comm Service Status is Running.
Figure 1: xPortalNet Comm Service Running Pop-up Message
Step 1: Login to xPortalNet HS Server.
Step 2: Go to Server Admin > Connection Setup. The Connection Setup window will be shown as below.
Figure 2: Connection Setup window
Step 3: Click Add to add a new connection. The Add Connection window will be shown as below. Fill in the respective fields and click OK to save changes
Figure 3: Add Connection window
.
.
Step 1: Go to xPortalNet HS Server > Server Admin > System Device Setup > Controller. The Connection Setup window will be shown as below:
Figure 4: Controller Setup window
Step 2: Click Add to add a new controller device. The Add Connection Window will be shown as below. Fill up the respective field and click OK to save changes.
Figure 5: Add Controller window
![](https://microengine.atlassian.net/wiki/download/thumbnails/942735490/worddav5c6adf889e6105031b753bcb72ef8c33.png?version=1&modificationDate=1559126048857&cacheVersion=1&api=v2&width=600&height=521)
Step 3: The following message window will be shown Record Added and click OKbutton.
Figure 6: Record Added window
.
.
Step 1: Go to xPortalNet HS Server > Server Admin > System Device Setup > Alarm Controller. The Alarm Controller Setup window will be shown as below:
![Alarm Controller Setup Window Alarm Controller Setup Window](https://microengine.atlassian.net/wiki/download/thumbnails/942735490/worddava9fb6e995aae0e899e9a3f276e054a85.png?version=1&modificationDate=1559126045588&cacheVersion=1&api=v2&width=556&height=412)
Figure 7: Alarm Controller Setup Window
Step 2: Click Add to add a new alarm controller device. The Add Alarm Controller window will be shown as below. Fill in the respective fields and click OK to save changes.
Figure 8: Add Alarm Controller Window
![](https://microengine.atlassian.net/wiki/download/thumbnails/942735490/worddav7e18c36971f904759f203eca24b3d7c6.png?version=1&modificationDate=1559126047738&cacheVersion=1&api=v2&width=600&height=315)
.
.
Step 3: The following message window will be shown Record Added and click OKbutton.
Figure 9: Record Added window
.
.
Step 1: Go to xPortalNet HS Server > Server Admin > System Device Setup > Output Point. The Output Setup window will be shown as below:
Figure 10: Output Setup Window
Step 2: Click Add to add a new output device. The Add Output Window will be shown as below. Fill up the respective field and click OK to save changes.
Figure 11: Add Output Window
![](https://microengine.atlassian.net/wiki/download/thumbnails/942735490/worddavf01aae2575668353d4f9c50b7e2bc49e.png?version=1&modificationDate=1559126046753&cacheVersion=1&api=v2&width=600&height=283)
.
.
Step 3: The following message window will be prompted to show that Record is Added. Click OK to continue.
![Record Added Window Record Added Window](https://microengine.atlassian.net/wiki/download/thumbnails/942735490/worddavf5ff8af9c077b9abf5439cb8fa165632.png?version=1&modificationDate=1559126045292&cacheVersion=1&api=v2&width=377&height=252)
.
.
Step 1:Go to xPortalNet HS Server > Server Admin > System Device Setup > Input Point. The Input Setup window will be shown as below:
Figure 13: Input Setup Window
Step 2: Click Add to add a new input device. The Add Input window will be shown as below. Fill up the respective field and click OK to save changes.
Figure 14: Add Input Window
![](https://microengine.atlassian.net/wiki/download/thumbnails/942735490/worddav56984c34e08f81d0da6dab02619f3651.png?version=1&modificationDate=1559126045858&cacheVersion=1&api=v2&width=600&height=452)
.
.
Step 3: The following message window will be shown Record Added. Click OKto continue.
Figure 15: Record Added Window
Step 4: Users can then proceed to create an Instruction Control to configure the relationship between the Inputs and Outputs.