Problem (Issue) Statement: | How to configure the XP-SNET controller using network connection | |||
Description: | This article will guide users to setup the network connection for XP-SNET controller. | |||
Related Software: | NIL | |||
Related Hardware: |
| |||
System Application: | NIL | |||
Symptom and Finding: | NIL | |||
Cause: | For first time guide on how to configure the XP-SNET controller using network connection | |||
. . Summary:
. Step-by-step Guide:
Step 1: Please ensure that the XP-SNET controller is properly connected to the other hardware.
. . Step 2: Users must then assign a unique IP address to the controller via the pre-configuration steps for IP controllers.
. . Step 3: Go to xPortalNet Server > Server Admin > Connection Setup > Add. The Add Connection window will be shown. Configure the settings as shown in the screenshot, and entering the pre-configured controller IP address in the Remote IP Address field. Click OK to save the changes. . Step 4: Go to xPortalNet Server > Server Admin > System Device Setup > Controller > Add. The Add Controller window will be shown. Configure the settings as shown in the screenshot. Click OK to save the changes. . Step 5: Go to xPortalNet Server > Server Admin > System Device Setup > Door > Add. The Add Door window will be shown. Configure the settings as shown in the screenshot. Click OK to save the changes. .
. Step 6: Users can now observe the status of the newly added controller and door in the Device List tab in xPortalNet Server and Client software. .
| ||||
Common Issues: | NIL | |||
Porting Date: | 8/4/2019 |
.
|
.
.