Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Problem (Issue) Statement:

How to connect Plato readers directly to XP-SNET controller and configure door settings in xPortalNet software

Description:

A guide to connect Plato readers directly to XP-SNET controller and configure door settings in xPortalNet software.

Related Software:

  • xPortalNet Lite
  • xPortalNet Standard
  • xPortalNet PS

Related Hardware:

  • XP-SNET

System Application:

  • Door Access System

Symptom and Finding:

NA

Cause:

For first time connection between Plato readers direct to XP-SNET controller and configure door settings in xPortalNet software.

Solution:







Summary

  • To connect Plato reader to terminal block of CON32 on XP-SNET controller.

  • To configure Door Settings on xPortalNet.

Step-by-step Guide:

  • To connect Plato reader to terminal block of CON32 on XP-SNET controller:

Step 1: Please follow the wiring diagram as below:
 
Figure 1: Wiring diagram for Plato reader connection


  • To configure Door Settings on xPortalNet:

Step 1: Ensure that the Connection and Controller setup has been completed.



Step 2: For Door Setup, go to Server Admin > System Device Setup > Door > Add. The Add Door window will be shown as below:
Add Door Window
Figure 2: Add Door window




Step 3: The table below shows the setting example for each door:

Date Documentation:

16/5/2018 (Rev 1.0)

PROOF-READ

.

Related Articles.

Containing the label "snet" AND "setup-guide"

Filter by label

There are no items with the selected labels at this time.

  • No labels