How to Connect Plato Readers Directly to XP-SNET Controller and Configure Door Settings in xPortalNet Software

Problem (Issue) Statement:	How to connect Plato readers directly to XP-SNET controller and configure door settings in xPortalNet software
Description:	A guide to connect Plato readers directly to XP-SNET controller and configure door settings in xPortalNet software.
Related Software:	xPortalNet Lite xPortalNet Standard xPortalNet PS
Related Hardware:	XP-SNET
System Application:	Door Access System
Symptom and Finding:	NA
Cause:	For first time connection between Plato readers direct to XP-SNET controller and configure door settings in xPortalNet software.
Solution:	Summary To connect Plato reader to terminal block of CON32 on XP-SNET controller. To configure Door Settings on xPortalNet. Step-by-step Guide: To connect Plato reader to terminal block of CON32 on XP-SNET controller: Step 1: Please follow the wiring diagram as below: Figure 1: Wiring diagram for Plato reader connection To configure Door Settings on xPortalNet: Step 1: Ensure that the Connection and Controller setup has been completed. Note Users may refer to How to Configure Connection, Controller, and Door Settings for XP-SNET controller with xPortalNet Software to complete the configuration settings. Step 2: For Door Setup, go to Server Admin > System Device Setup > Door > Add. The Add Door window will be shown as below: Figure 2: Add Door window Step 3: The table below shows the setting example for each door:
Date Documentation:	16/5/2018 (Rev 1.0)

PROOF-READ

.

Summary