Page Comparison

When users flashed a valid access card to the reader, the user failed to gain access through the door. Upon investigation, the software recorded transaction of "Wrong Time Zone" for the particular user.

This article will guide users on how to troubleshoot and rectify the problem.

• xPortalNet

• affected user is not configured to have accessibility rights to the affected door.
• affected user is accessing the door during holiday.

.

.

Step 1: Users must ensure that the Door Access Level is configured in the software.

.

.

• Anchor
  assign assign

  To assign the configured Door Access Level to the affected users:

Step 1: Go to xPortalNet Client > Data Setup > Access Data Setting > Staff Records. The Staff Detail Setup window will be shown. 

Figure 2: Staff Detail Setup Window

.

Step 2: Click Add to add a new staff record or Modify to edit an existing staff record. The following window will be shown. Fill up the staff record details, and click Door Accessibility tab. Alternatively, users can also click on the Door Access Code field. Select the pre-configured Door Access Level in section 1 above.

Figure 3: Selecting Pre-configured Door Access Level for the Staff

.

Step 3: After completing the rest of the information, click OK. The software will return to the Staff Detail Setup window, where the newly added staff will be shown.

Figure 4: Staff Detail Setup Showing the Newly Added Staff

.

.

• Anchor
  download download

  To download the Staff Records to the affected controllers:

Step 1: Go to xPortalNet Client > Device Comm > Send Staff Settings > Send All. Ensure that the sending process is completed without any errors. Flash the access card to the reader again to confirm that the card user is able to gain access. The software will record the transaction of "Valid Entry Access"

Figure 5: Software Recording Valid Entry Access Transaction