Problem (Issue) Statement: | How to connect elevator COP buttons to XP-SNET-E32R extension board | ||||||||||
Description: | A guide to configure the connection from elevator COP buttons to XP-SNET-E32R Extension Board | ||||||||||
Related Software: | NIL | ||||||||||
Related Hardware: |
| ||||||||||
System Application: |
| ||||||||||
Symptom and Finding: | NIL | ||||||||||
Cause: | For first time guide to connect elevator COP buttons to XP-SNET-E32R Extension Board | ||||||||||
Solution: | Summary:
. Step-by-step Guide:
Step 1: Please refer to the wiring diagram: Elevator COP buttons to XP-SNET-E32R extension board. . Step 2: The details of the relay contact on XP-SNET-E32R between COP buttons to COP buttons PWB is shown as below: .
. .
| ||||||||||
Common Issues: | Cabling termination not following the correct polarity may cause reduced relay contact life and generate additional interference. | ||||||||||
Date Documentation: | 25/8/2020 (Rev 1.0) |
...
Section | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||
|
.
...
.
Choices for confluence | ||
---|---|---|
|