Versions Compared

Old Version 12

changes.mady.by.user Tan Rong Wei

Saved on

compared with

New Version Current

changes.mady.by.user Tan Rong Wei

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Problem (Issue) Statement:

How to connect Plato readers to MK800E Reader Interface Module, and to connect MK800E to XP-SNET controller as well as to configure door settings in xPortalNet software

Description:

A guide to connect Plato readers to MK800E Reader Interface Module, and to connect MK800E to XP-SNET controller as well as to configure door settings in xPortalNet software.

Related Software:

  • xPortalNet Lite
  • xPortalNet Standard
  • xPortalNet PS

Related Hardware:

  • XP-SNET
  • XP-MK800E
  • Plato Reader

System Application:

  • Door Access System

Symptom and Finding:

NA

Cause:

For first time connection between Plato readers to MK800E Reader Interface Module, and to connect MK800E to XP-SNET controller as well as to configure door settings in xPortalNet software?

Solution:








Warning
titleWarning!

  • Users are not recommended to run any xPortal software in Windows XP operating system as the system is unstable

  • Users are also advised to stop the xPortal Services before shutting down the Server PC to prevent any missing transaction issues.

.

.

Warning
titleWarning!

The XP-SNET controller will not send fire alarm signal over to the connected XP-SNET-E32R and/or XP-SNET-E248 extension boards if the configuration settings for the XP-SNET controller is not completed.

Complete the configuration settings for XP-SNET controller in order for XP-SNET-E32R and/or XP-SNET-E248 to respond accordingly to fire alarm signals.

.

.

Summary


Step-by-step Guide:

  • Anchor
    1
    1
    To connect Plato reader to MK800E Reader Interface Module:

Step 1: Please follow the wiring diagram as below:
 
Figure 1: Wiring diagram for Plato reader to MK800E


  • Anchor
    2
    2
    To connect MK800E to terminal block of CON33 on XP-SNET controller:

Step 1: Please follow the wiring diagram as below:
Wiring Diagram for MK800E to XP-SNET Controller
Figure 2: Wiring diagram for MK800E to XP-SNET controller



  • Anchor
    3
    3
    To configure Door Setting on xPortalNet:

Step 1: Ensure that the Connection and Controller setup has been completed.

Info
titleKnowledge Base Link

Users may refer to How to Configure Connection, Controller, and Door Settings for XP-SNET controller with xPortalNet Software to complete the configuration settings.



Step 2: For Door Setup, go to Server Admin > System Device Setup > Door > Add. The Add Door window will be shown as below:
Add Door Window
Figure 3: Add Door window





Step 3: The table below shows the setting example for each door:

Date Documentation:

19/6/2018 (Rev 1.1)

...

Section
bordertrue


Column
width100%

Related Articles.

Containing the label "snet" AND "setup-guide"

Filter by label (Content by label)
showLabelsfalse
max5
showSpacefalse
sorttitle
cqllabel = "snet" and label = "setup-guide" and space = "MKB" and title ~ "door !\"connect plato readers to mk800e reader interface module, and to connect mk800e to xp-snet controller as well as to configure door settings in xportalnet software\""


.

...

.

Choices for confluence
_id5d09ced524c64e0020444e36