Page Comparison

Summary.

• To configure Connection setup.

• To configure Controller setup.

• To configure Lift Panel setup.

• To configure Floor Relay setup.

Step-by-step Guide:

• Anchor
  1 1

  To configure Connection setup:

Step 1: Go to xPortalNet Server > Server Admin > Connection Setup > Add.

Step 2: The Add Connection window will be shown. Fill in the Connection information accordingly. Click OK to save the changes.

Figure 1: Add Connection Window

• Anchor
  2 2

  To configure Controller setup:

Step 1: Go to xPortalNet Server > Server Admin > System Device Setup > Controller > Add.

Step 2: The Add Controller window will be shown. Fill in all controller information accordingly. Click OK to save the changes.

Figure 2: Add Controller Window

• Anchor
  3 3

  To configure Lift Panel setup:

Step 1: Go to xPortalNet Server > Server Admin > System Device Setup > Lift Panel > Add.

Step2: The Add Lift window will be shown. Fill in all lift information accordingly. Click OK to save the changes.

Figure 3: Add Lift Window

The table below indicates the Lift Panel number:

• Anchor
  4 4

  To configure Floor Relay setup:

Step 1: Go to xPortalNet Server > Server Admin > System Device Setup > Lift Panel > Add.

Step 2: The Add Floor Relay window will be shown. Fill in all floor relay information accordingly. Click OK to save the changes.

Figure 4: Add Floor Relay Window

The table below shows the relay number scheme to be followed:

Step 3: Continue by creating Floor Zone and Floor Accessibility for the lift at xPortalNet Client.