Problem (Issue) Statement: | How to configure address unit no on XP-SNET-E248 extension board |
Description: | A guide to configure address unit no on XP-SNET-E248 extension board. |
Related Software: | NA |
Related Hardware: |
|
System Application: |
|
Symptom and Finding: | NA |
Cause: | For first time configuration for address unit no on XP-SNET-E248 extension board. |
Solution: | Summary
Step-by-step Guide:
Step 1: The XP-SNET-E248 address setting for the DIP switch can be referred to as shown below:
Note The address of the extension boards must be unique (ranging from '00' to '03'), i.e.: no two extension boards in the same connection network can have the same address.
Step 1: On the XP-SNET controller, ensure that both D33 & D34 LEDs in the "Downlink" section (lower left section of XP-SNET controller) is blinking to indicate that the XP-SNET controller has successfully established communication with the XP-SNET-E248 extension board. |
Date Documentation: | 23/5/2018 (Rev 1.0) |
PROOF-READ
.
Related Articles.
Containing the label "e248"
Filter by label
There are no items with the selected labels at this time.